Built From the Ground Up. Designed for What’s Next.

Adhesive cement for tiles, economical for less demanding circumstances. Bonds terracotta tiles, pressed and ceramic tiles of small and medium format, on cementitious substrates, on paving and interior walls.

Smooth textured coloured joint compound for thicknesses from 0 to 5 mm wide, with low water absorption and smooth finish. Suitable for grouting all types of ceramic tiles or ornamental stone.

Coloured joint compound for 3 to 12 mm wide, with low water absorption and smooth finish. Suitable for grouting all types of ceramic tiles or ornamental stone.

ADHERE FLEX TT PRO is a high-performance, deformable cement-based tile adhesive designed for bonding large-format, low-absorption tiles to interior and exterior walls and floors.

White adhesive cement for bonding ceramic tiles in swimming pools or other environments with a high level of humidity. Also suitable for filling joints in glazed tiles.

From the cork mortars range, it is a light mortar incorporating cork aggregates. Indicated for filling and smoothing layers on interior and exterior floors, with improved thermal and acoustic performance.

From the BECORK range, it is a lightweight mortar formulated with cork aggregates and Natural Hydraulic Lime (NHL). Suited for plastering on interior and exterior surfaces of walls and ceilings, where it is intended to increase the thermal and acoustic performance of the walls.

Polysiloxane solvent-based water repellent used to protect porous surfaces, floors, walls, facades, tiles and wood.

Hydraulic binding agent for standard use.

Sprayable thermal insulation mortar with very low-density aggregates (expanded polystyrene). Intended for the application of thermal insulation to buildings from the outside or from the inside.

Fibre-reinforced dry mortar designed for smoothing and finishing surfaces, with ISODUR thermal insulation plaster or other hydraulic plasters. Provides a fine sanded texture for subsequent painting.

It is an anti-alkaline primer of the range of primers that regulates substrates and adhesion bridges on cementitious substrates. Suitable for acrylic finishes ISOVIT REV FINO, ISOVIT REV MEDIO and ISOVIT REV REFLECT.

It is an aqueous silicate primer of the range of primers, for the ISOVIT REV SP solution. Its high alkalinity prevents the formation of fungi and algae.

It is a thermoacoustic insulation for facades, from the ETICS System insulation range.

Bonding mortar based on Natural Hydraulic Lime (NHL) and cork. It promotes increased thermal and acoustic performance of exposed black cork agglomerate boards (ICB) in external thermal insulation systems, namely ISOVIT CORK MD.

It is a thermal insulation for facades from the ETICS System insulation range.

It is a thermal insulation for facades from the ETICS System insulation range.

Fibre-reinforced white mortar. Indicated for bonding and surface levelling of insulation boards in ISOVIT external thermal insulation systems and for levelling ISODUR thermal plaster, as the substrate for final finishes. Usable in new constructions and renovation of facades.

Lightweight bonding and surface regularisation mortar based on Natural Hydraulic Lime (NHL) and cork. It promotes increased thermal and acoustic performance of external thermal insulation boards in a range of systems, namely ISOVIT CLÁSSICO LEV, ISOVIT CORK, ISOVIT WF and the ECOCORK LIME thermal render.

Surface fixing and levelling mortar for EWI systems or for mesh plastering renovation on old surfaces, which base link is exclusively Natural Hydraulic Lime.

It is a 100% fibreglass net of 160 g/m2 from the ETICS System range of accessories, with anti-alkaline treatment.

It is a thermoacoustic insulation for facades, from the ETICS System insulation range.

From the finishes range, this is a textured final finish, available in 30 colours with fine grain size. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

From the finishes range, this is a textured final finish, available in 30 colours with medium grain size. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

From the finishes range, this is a textured final finish, available in 30 colours with medium grain size. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

From the finishes range, this is a 100% silicate coating with protection against the development of fungi and algae, forming a textured final finish with fine grain size. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

From the finishes range, this is a 100% silicate coating with protection against the development of fungi and algae, forming a medium-grained textured final finish. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

From the finishes range, this is a 100% silicate coating with protection against the development of fungi and algae, forming a medium-grained textured final finish. For finishing ISODUR and ISOVIT thermal insulation systems. Applicable over hydraulic renders.

Water-based silicate paint, highly vapour permeable, for finishes of the ISOVIT CORK system or REABILITA coating systems.

It is a straight aluminium profile with drip tray, from the ETICS System range of accessories.

It is an expandable wall plug in nylon, with polypropylene nail for masonry or concrete, from the ETICS System range of accessories.

It is a disc in nylon with galvanised steel screw, from the ETICS System range of accessories, for fastening on wood, OSB and Viroc.

Ideal for softer applications and interior work, thanks to its high-quality binding properties that make it perfect for the production of plasters and decorative finishes.

Ideal for stone masonry application, a general-purpose NHL, combining both aerial and hydraulic setting and hardening in a single additive-free formulation.

Engineered for demanding and exposed applications such as masonry structures, standard flooring, and thermal flooring.

Natural Hydraulic Lime (NHL) finishing mortar for old masonry repair systems, for subsequent painting.

Smooth finishing mortar for very fine thicknesses (1 to 2 mm). Based on natural hydraulic lime and intended for repairs to old masonry.

Natural Hydraulic Lime Mortar (NHL) for the consolidation and homogenisation of old masonry.

Rendering mortar formulated exclusively with Natural Hydraulic Lime (NHL), for coating old masonry or new-build masonry.

Premixed mortar formulated exclusively from Natural Hydraulic Lime (NHL), siliceous aggregates and additions, specially developed for laying and grouting traditional tiles in restoration work.

Plastering mortar with natural fibres, made from Natural Hydraulic Lime (NHL), for filling and levelling in old masonry repair systems.

Mortar based on natural hydraulic lime (NHL), water repellent and high adhesion. Designed for the repair and execution of joints in stone masonry.

Filling screed mortar in which the binder is exclusively natural hydraulic lime (NHL).

100% fibreglass mesh with 160 g/m2 anti-alkaline treatment.

Improved flexibility of plaster repair mortar, applicable in a thin layer (2 to 3 mm), for subsequent painting.

Mortar for the renovation of painted surfaces. For the application of tinned finishes over old textured finishes.

Dry mortar suitable for first-layer rendering on interior walls and ceilings, specifically designed as a base render for the subsequent application of REDUR PK finishing mortars.

Dry mortar designed for executing single-layer sprayed plasters with a scraped, carapinha or oak bark finish. No painting required.

Fibre reinforced and water-repellent dry mortar intended for the execution of fine sand finish renders, enabling painting or skim finishes.

Dry mortar intended for the execution of medium sand wash finish renders on interior and exterior walls and ceilings.

Dry multipurpose mortar, intended for laying masonry and executing roughcast and exterior and interior plasters.

Synthetic stucco, with acrylic resins in water dispersion. Ready to apply, designed to give surfaces a smooth exterior or interior finish, ready to be painted.

Cementitious tinned finishing mortar in a very thin layer. Apply on properly levelled surfaces, indoors and in wet areas, ready to be painted.

Single-component dry mortar, intended to form an adherence bridge on a wide range of common construction substrates.